HELP! desperate

cients
Forums
Support
Dear administrator, dear All, I had the elearning site prepared with data, users, views, translations, classes, lessons and blocks properly defined. Due to a system restoration point that had to do in the computer this site that was created and working very well, with translated commands and fully customized is not working anymore. I can not access the intial page, it gives me the error "this site is not available, please try later". But if try to login using localhost/elearning/user then it presents everything I created, including the menus in Portuguese. The prblem is that when I click every command in the menu it gives me the same page saying the error "this site is not available, please try later". Can you please give me any help on this and state your opinion on how can I recover the data and integrity even if I try to produce a new site (am already trying to do). Thank you very much!!!
James Aparicio
jeu 27/02/2014 - 16:08

Hi clients

Hi clients Can you please clarify what you mean by "Due to a system restoration point that had to do in the computer this site that was created and working very well, with translated commands and fully customized is not working anymore"? First thing to check would be to go to admin/reports/dblog. I think you wont be able to find anything there because of the type of message it seems to be a webserver problem (apache). DNS problem maybe? Can you check your apache log? To recover opigno, you need the database as well as the opigno folder. Best regards
cients
jeu 27/02/2014 - 16:40

Tried but can't find anything

I tryed but it is not possible. In fact I think that one of the programs I run deleted something in DNS. Am trying to access the Apache log...
cients
jeu 27/02/2014 - 16:44

I have the Apache log does it make any sense?

127.0.0.1 - - [27/Feb/2014:15:36:55 +0000] "GET /elearning/admin/reports/dblog HTTP/1.1" 500 6900 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36"
cients
jeu 27/02/2014 - 16:46

Apache log when I try to access admin

127.0.0.1 - - [27/Feb/2014:15:42:48 +0000] "GET /elearning/admin HTTP/1.1" 500 6796 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36"
cients
jeu 27/02/2014 - 16:49

And this one I can access very well and see everything OK

127.0.0.1 - - [27/Feb/2014:15:45:44 +0000] "GET /elearning/user HTTP/1.1" 200 108378 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36" But the menus are not working, when I click it gives me all errors, I will report each one...
cients
jeu 27/02/2014 - 16:51

When I try to access structure

127.0.0.1 - - [27/Feb/2014:15:48:15 +0000] "GET /elearning/admin/structure HTTP/1.1" 500 6796 "http://localhost/elearning/user" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36" But if I try to access a course or the lateral menus, then part of them work. I will send the logs
cients
jeu 27/02/2014 - 16:54

Access a course already defined

I try to access this course and it is OK... http://localhost/elearning/course/40/curso-de-informa%C3%A7%C3%B5es I get this on the Apache log: 127.0.0.1 - - [27/Feb/2014:15:51:03 +0000] "GET /elearning/course/40/curso-de-informa%C3%A7%C3%B5es HTTP/1.1" 200 112513 "http://localhost/elearning/user" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36" 127.0.0.1 - - [27/Feb/2014:15:51:12 +0000] "GET /elearning/profiles/opigno_lms/themes/platon/img/quiz-import-tool-icon.png HTTP/1.1" 200 1021 "http://localhost/elearning/course/40/curso-de-informa%C3%A7%C3%B5es" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36" 127.0.0.1 - - [27/Feb/2014:15:51:12 +0000] "GET /elearning/profiles/opigno_lms/themes/platon/img/forum-tool-icon.png HTTP/1.1" 200 1269 "http://localhost/elearning/course/40/curso-de-informa%C3%A7%C3%B5es" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36"
cients
jeu 27/02/2014 - 16:56

I have the database and also the folder

I have the database and also the folder Do I try to do an install.php ?
James Aparicio
jeu 27/02/2014 - 17:04

Hi clients,

Hi clients, Create a new folder called elearningbackup for example and copy the site content of the backed upsite there. Create also a new db with your backed up db. Then inside elearningbackup/sites/default you have a settings.php. Change the database to the one you just created. Best regards
cients
jeu 27/02/2014 - 17:24

Problem is in database !!!

OK I checked the database and these tables have the name there but don't exist (#1146 Table "..."I doesn't exist) and I don't know why: cache cache_admin_menu cache_blok cache_entity (both) cache_field cache_image cache_filter Can this be rebuilt? The others are there
James Aparicio
jeu 27/02/2014 - 17:34

Hi cients?

Hi cients What do you mean by "have the name but don't exist"? Those tables do not exist in the database? Those tables can be emptied. Try going to the opigno icon on the top admin bar and run "Flush all caches". Best regards
cients

En réponse à par James Aparicio

jeu 27/02/2014 - 17:39

And run install.php?

Shall I run install.php? Because when I run the site localhost/elearning, starts an error messages related to the database...
James Aparicio

En réponse à par cients

jeu 27/02/2014 - 17:45

No, you should not run

No, you should not run install.php, what i described should be enough. The install should only be done once, never again.
cients

En réponse à par James Aparicio

jeu 27/02/2014 - 17:45

Can't...

The name of the tables are there. But when I try to open with a click it gives the error "#1146 Table doesn't exist" within a red box. I tryed with other databases and the tables exist (even with a new opigno installation). I enter with localhost/elearning/user But when I try to run any of the menu commands like "Flush all caches" or "structure" or "administration" it gives me the initial error... "site can not be accessed"
James Aparicio

En réponse à par cients

jeu 27/02/2014 - 17:48

You mean in phpmyadmin?

You mean in phpmyadmin?
cients
jeu 27/02/2014 - 17:51

Translations already done

I am starting with a new site (just in case I can't recover the prepared old one). I translated lots of strings within the menus that are not in the Portuguese translated files ready on the Drupal download. Can you please tell me which are the files that recorded those translations?
James Aparicio

En réponse à par cients

jeu 27/02/2014 - 17:57

Hi clients

Hi clients The tables are locales_source and locales_target. Best regards
James Aparicio
jeu 27/02/2014 - 17:59

Once you have everything

Once you have everything sorted out, can you please contribute to the languages? https://www.opigno.org/en/forum/translations/translation-pt Best regards
cients

En réponse à par James Aparicio

jeu 27/02/2014 - 18:00

No, when I try to start the

No, when I try to start the site using http://localhost/elearning/ it gives immediately the error "can not access site, please try again later". If I change to http://localhost/elearning/user I can login and can access the menus (all of them) including "strucuture" ""Apps" "modules" and so on... The problem is that when I click in one of them from the top menu, it gives me the error page "can not access site, please try again later". But instead of the top menu if I click in a course or a lesson, I can access the course data and lesson data. But if I try to "administer" anything in which I have to use any of the administration commands, give me the same error...
James Aparicio

En réponse à par cients

jeu 27/02/2014 - 18:04

Try going to phpmyadmin and

Try going to phpmyadmin and emtpy all the cache tables. Best regards
cients
jeu 27/02/2014 - 18:19

Thank you!!!

Yeah, for sure I will contribute. Thank you very much for your concern about this subject.
wadmiraal

En réponse à par cients

jeu 27/02/2014 - 18:26

Let us know how it goes, and

Let us know how it goes, and if you need any more help.
cients

En réponse à par James Aparicio

jeu 27/02/2014 - 18:28

I exported the tables you

I exported the tables you mentioned but the values of the fields are in numeric aspect. How can I see the text? Thanks, best regards, LN
James Aparicio

En réponse à par cients

ven 28/02/2014 - 17:14

Hi cients,

Hi cients, They are mapped from english in one table to other languages in the other table. And they are serialized. What do you want to do exactly? http://www.php.net/manual/pt_BR/function.unserialize.php Best regards